Zastava M92 Dust Cover: Is a Railed Top Cover Worth It?

The JMac Zastava M92 dust cover is the DC-ZPAK: a railed top cover for the M92/ZPAP92 that locks into the rear trunnion and weighs 7.1 oz. If you want an optic on top of the receiver, it is worth it. It needs the MMS lower mount, so it is an upgrade for M92s running or adding an MMS handguard.

The product page says its locking system is designed to return optics to zero when the cover is opened and closed.

What do I need before the Zastava M92 dust cover?

The MMS lower mount, HG-AKM-LM, which comes with most MMS handguards. Check whether yours includes it. Our best Zastava M92 handguard is the HG-ZM92-7.72LNR. It fits the M92/ZPAP92, and it is the length our handguard page calls M92-optimal. The full system is on the MMS ZPAP M92 page.

What is in the DC-ZPAK box?

The DC-ZPAK has a 7075-T6 body with a Type 3 hardcoat and 4140 heat-treated hardware: the anchor, recoil spring button and octagonal cam washers. It comes with a replacement recoil rod assembly, hex wrenches and thread locker. The page recommends installation by a qualified gunsmith and says no hammers or files are needed.

Why will my DC-ZPAK not seat on my M92?

This is the question we hear most about this part. Every Zastava MMS dust cover now includes an updated lower recoil-spring anchor made for Zastava firearms. Rear-trunnion specifications vary, so light fitting may be required. If yours still will not seat, contact us.

What goes below and up front on an M92?

• MW-AK-762 mag funnel: 1.5 oz. It bolts to the MMS lower mount and needs the updated mount with threaded side holes.
• GT-ZM92 gas tube: 3 oz of 1913 rail up front. It fits the M92/ZPAP92.

M92 fit table

Fit and availability are separate. This guide covers fit, not legal status. Check current federal, state and local law for your configuration.

FAQ

What does the DC-ZPAK need to install?

The MMS lower mount (HG-AKM-LM) and an MMS handguard. The page recommends a qualified gunsmith.

Does the M92 dust cover hold zero?

The product page says its locking system is designed to return optics to zero when the cover is opened and closed.

Why will my DC-ZPAK not seat on my M92?

Rear trunnions vary. Every Zastava MMS dust cover includes an updated lower anchor, and light fitting may be required.

Which mag funnel fits the M92?

The MW-AK-762, which fits with conditions. It needs the updated MMS lower mount with threaded side holes.

Does the GT-ZM92 gas tube fit the M92?

Yes. It fits the Zastava M92/ZPAP92 within the MMS system.