AK Mag Funnel: Gimmick or Game-Changer?
An AK mag funnel is neither a gimmick nor a game-changer. It is a guide that steers the magazine into the well. JMac's MMS Mag Funnel bolts to the MMS lower mount and the trigger guard, at 1.5 oz in 7.62 and 2.0 oz in 5.56/5.45. We have not published timed reload tests, so we do not claim a speed number.
Parts in this post

MMS - Mag Funnel
MMS M-LOK Handguard
MMS Lower Mount
HRD Extended Hand Retention Device
360HD Plan B Taper Mount
Is a mag funnel the same as an AK magwell funnel?
Yes. People search for it as "AK magwell funnel". We call ours the MMS Mag Funnel.
What is the JMac mag funnel made of?
It is 7075-T6 aluminum with a Type 3 hardcoat, and it comes with full mounting hardware and wrenches. Two side screws go into the MMS lower mount, and the rear hardware secures around the mag-catch section of the trigger guard. The product page says it needs no modification.
Which AK mag funnel caliber is available?
- MW-AK-762: sized for 7.62x39 magazines, 1.5 oz.
- MW-AK-556: sized for 5.56, 5.45 and .300 BLK magazines, 2.0 oz.
Will an AK mag funnel work without an MMS handguard?
No. The funnel mounts to the MMS lower mount, which comes with the MMS handguard. Early lower mounts without threaded side holes do not take it. The updated lower mount is offered on the funnel page.
What else finishes the AK front end?
The HRD-EXT handstop gives the support hand a hard stop. It is 7075-T6, reversible, uses three M-LOK slots and fits our MMS handguards; the product page says it fits any M-LOK handguard. Muzzle devices are a separate fit question that depends on thread and host. Each RRD™ 360HD page carries its own fit check.
Mag funnel fit table
| Host | Part | Fit | Conditions |
|---|---|---|---|
| PSA Krink 5.56 / 5.45 / .300 BLK | MW-AK-556 | Fits with conditions | Requires the updated MMS lower mount with threaded side holes. Sized for 5.56, 5.45 and .300 BLK magazines. |
| PSA Krink 7.62x39 | MW-AK-762 | Fits with conditions | Requires the updated MMS lower mount with threaded side holes. Sized for 7.62x39 magazines. |
| Century WASR 7.62x39 | MW-AK-762 | Fits with conditions | Requires the updated MMS lower mount with threaded side holes. Sized for 7.62x39 magazines. |
| Zastava M92 / ZPAP92 | MW-AK-762 | Fits with conditions | Requires the updated MMS lower mount with threaded side holes. Sized for 7.62x39 magazines. |
| Arsenal SGL 21-94; KUSA KR-103 / KR-103-SFS | MW-AK-762 | Fits with conditions | Requires the updated MMS lower mount with threaded side holes. Sized for 7.62x39 magazines. |
FAQ
Does a mag funnel make reloads faster?
It guides the magazine into the well. JMac has not published timed reload data, so we do not claim a speed number.
Does the funnel need the MMS handguard?
Yes. The funnel bolts to the MMS lower mount, and early lower mounts without threaded side holes need the updated HG-AKM-LM.
How much does it weigh?
1.5 oz for the 7.62 funnel and 2.0 oz for the 5.56/5.45 funnel, per the product page.
Which funnel is sized for a 5.45 or .300 BLK magazine?
The MW-AK-556. It is sized for 5.56, 5.45 and .300 BLK magazines.
Does it require modifying the rifle?
No, per the product page. It bolts to the MMS lower mount (the updated version with threaded side holes) and the trigger guard with the included hardware.
Explore Popular Articles
Tan AK Handguard: Is Black Still the Best Color?
A tan AK handguard fits exactly like the black one. Our compatibility records treat green and tan MM...
Krink Handguard: The M-LOK Front End for the PSA Krink
Our Krink handguard is the HG-AKSU-4.70, the 4.70-inch M-LOK handguard made for the PSA Krink. It fi...
AK QD Sling Mount and Handstop: Small Parts Guide
The RC-QD is a front QD point that also bridges the MMS sling-loop cut and shields the hand from ret...
How to Time a Muzzle Brake (and When You Don't Have To)
Timing a muzzle brake means adding shims or a crush washer between the brake and the barrel so that...