Ash Showcases the new 360 X-Series

In order to use this device with a suppressor, it must be installed by a professional - to ensure it is properly mounted and aligned. Do NOT shoot without checking alignment with bore rods. JMac Customs is not responsible for any damage to the suppressor, or any injury or death resulting from improper installation. Some firearms are NOT suitable suppressor hosts, just because you can thread this muzzle device on, does NOT mean it is safe to use. 

The X Series muzzle brake and suppressor adapter remains installed on your firearm and allows direct threading of several suppressors! Its lighter, Shorter, Simpler and Less expensive than most QD systems on the market while maintaining all the positive attributes of a direct thread mount! There are no adapters involved the suppressor threads DIRECTLY onto the mount!

What makes the 360 unique?

• 3 baffles to protect your suppressor
• No timing required
• Simple, no adapters
• Remains installed on your firearm
• Lightweight
• Minimal added length
• Compatible with dozens of suppressors
• Reduced Recoil
• Reduced Flash
• Blast Shield Available

 Specifications

•  26-1.5LH Barrel Threads
• 1.48" long (adds approx 1")
• 9mm Bore
• 1.203-28 External Threads
• 17-4ph Stainless
• Black Nitride
• Compatible with BDS-20 Blast Diversion Shield and DeadAir Wolfman

M85 REQUIRES BUSHING FOUND HERE --> https://www.jmac-customs.com/bushing-for-installing-x-series-on-m85-pistols/

*Facemount devices index on the face of the muzzle and are not required to engage the detent pin. It is normal for a portion of the muzzle threads to be exposed.

X-Series Suppressor Compatibility

Check out our Blog Post!

JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.